当前位置: 首页 > 当地频道中心

【软管泵-路沿石成型机服务周到】

     发布人:[东莞]豫信致诚机械设备有限公司
  • 更新时间: 2025-04-23 04:39:01
  • 公司邮箱 2831509198@qq.com
  • 公司名字: [东莞]豫信致诚机械设备有限公司
  • 公司地址: 东莞中站李封南会253号
  • 杨经理
    19939106370
    扫一扫
    扫一扫,用手机访问更方便
    【软管泵-路沿石成型机服务周到】,豫信致诚机械设备有限公司为您提供最新【软管泵-路沿石成型机服务周到】产品案例,联系人:杨经理,电话:19939106370、19939106370,QQ:2831509198,中站李封南会253号发货到广东省东莞市
            
    我们的【软管泵-路沿石成型机服务周到】产品视频已经准备好,它将为您呈现产品的完美细节,让您为之惊叹不已。


    以下是:【软管泵-路沿石成型机服务周到】的图文介绍



    首先我们先介绍一下软管泵,软管泵又称蠕动泵。为了消除泵体污染流体或流体污染泵体的危险性,整个泵的装置中只有软管与介质接触。在一般场合下,软管泵使用的都是天然橡胶的软管。内层和外层都是完整光滑的天然橡胶,其目的是很强防磨损。适用于腐蚀性不高但磨损性很大的如泥浆以及无机物等等介质。而且一般适用于脂肪、油类或油脂的介质,以及有机化学物质。内层是橡胶,而外层是天然橡胶或者是复合橡胶。

    First of all, lets introduce the hose pump, which is also called peristaltic pump. In order to eliminate the danger of the pump body contaminating the fluid or the fluid contaminating the pump body, only the hose in contact with the medium in the entire pump device. In general, hose pumps use natural rubber hoses. The inner and outer layers are completely smooth natural rubber, the purpose of which is to prevent abrasion. It is suitable for mediums that are not corrosive but very abrasive, such as mud and inorganic substances. And generally suitable for fats, oils or oils, and organic chemicals. The inner layer is rubber, while the outer layer is natural rubber or composite rubber.

     




    豫信致诚机械设备有限公司经过全体员工长期以来坚持不懈的努力,现已发展成为一家集设计开发、生产加工、销售、服务为一体的高新技术企业;是中国专业从事 广东东莞工业软管泵等制造商之一。




    软管泵的典型用途:
    化工行业,各种防腐蚀浆料和无机盐物料;石油、钻井、水处理、泥浆、石灰浆;采矿冶金的充填物料,矿浆输送;食品行业,油类物料及饮料,糊状料输送;造纸行业,纸浆、硫磺输送;建筑业,水泥沙浆、泡沫混凝土生产线,楼顶屋泡沫轻质流体物料;油漆、涂料、钛 、二氧化碳等物料输送。

    Typical use of hose pump:
    Chemical industry, various anti-corrosion slurry and inorganic salt materials; petroleum, drilling, water treatment, mud, lime slurry; filling materials for mining and metallurgy, slurry transportation; food industry, transportation of oil materials and beverages, paste; papermaking Industry, pulp and sulfur transportation; construction industry, cement mortar, foam concrete production line, rooftop foam light fluid materials; paint, coating, titanium dioxide, carbon dioxide and other materials transportation.




    软管泵工作原理:
    一根内壁光滑,强度可靠的特制橡胶软管安装在泵体内部,通过一对压辊沿着软管旋转挤压,这样的 旋转使得介质往一个方向输送而不会倒流,软管在输送介质之后,由被压扁软管的自身弹性和侧导轮的强制下,软管恢复原状,此时,软管内产生高真空将介质再次吸入管腔,然后介质在随之而来的压辊挤压下从软管内排出,如此周而复始,介质不断的被吸入和排出。目前产品使用温度为≤100℃。根据用户需要可以开发使用温度在120℃的软管泵软管产品。
    Working principle of hose pump:
    A special rubber hose with a smooth inner wall and reliable strength is installed inside the pump body. It is rotated and squeezed along the hose by a pair of pressure rollers. This rotation allows the medium to be transported in one direction without flowing back. After that, due to the elasticity of the flattened hose and the force of the side guide wheels, the hose returns to its original state. At this time, a high vacuum is generated in the hose to suck the medium into the lumen again, and then the medium is pressed by the subsequent pressure roller. It is discharged from the hose under the squeeze, and so on and on, the medium is continuously sucked in and discharged. The current product temperature is ≤100 ℃. According to user needs, we can develop hose pump hose products with a temperature of 120 ℃.
    也许您对以下产品新闻也感兴趣

    技术支持:s797.com

    首页

    交谈

    商家电话